“The only “ForeverSani” Clean Restroom System”

Restroom Restoration and Sanitation Services

In most situations unless your facility is new we will need to do a restoration prior to applying our one time SaniSeal coatings. Unfortunately, in most cases your current cleaning process has been your own worst enemy. Janitors have treated our restroom substrates for years with harsh cleaning chemicals opening the pours to germs and breaking down the molecular structure of the substrates. The SaniClean restoration and seal will allow you stop this degradation and to throw away those harsh non-environmentally friendly chemicals forever!

These are the five major steps we take one time in the initial SaniClean process.

1. We use high pressure wash (450psi), high pressure steam (310 degrees & 90psi) 350mph blow dry and wet & ‘Dry Vacuum equipment on all water tight surfaces substrates from the ceiling to the floor. Old dirty calking is removed and re-calked where needed.

2. We use a Floor Machine designed specifically for grouted ceramic tile floors with a brush and pad also specifically for grouted ceramic tile floors to clean, restore and sanitize your floors and grout joints.

3. All areas wet cleaned for restoration are dried with industrial floor and hand held blowers to insure all moisture is completely removed.

4. All glass, fiberglass, stone, granite, marble, concrete, porcelain, ceramic tile, painted doors, aluminum, chrome and stainless steel is sealed with our proprietary “SaniClean” sealers.

5. All ceramic floor tiles will be polished to a “SaniClean” satin finish with our proprietary “SaniClean” compounds & systems. All grout & ceramic tile will be sealed with our proprietary “SaniClean”s sealers.

In major cases even bead blasting and re-chroming are available if needed. Keep in mind that the extra effort is worth it up front because of the superiority of our sealers and maintenance protocols will keep them like new and germ free for years to come.